Home / Weight Indicators
YL-WLZY-S10 Weight Display Controller
- Dual-row LED/OLED display: upper row shows check-weighing result, lower row shows real-time weight
- 1x RS232 + 1x RS485 serial ports
- Modbus TCP support, register map identical to the serial ports
- Optional I/O expansion board: 4 inputs / 8 outputs, 24V external, common-GND output; inputs accept high- or low-active signals
- Compatible with all strain-gauge force and weighing sensors, drives up to four 350Ω load cells
- Manual check-weighing mode
- Dual photoelectric sensor logistics mode (gate + in-scale photoelectric sensors)
Request a Quote for YL-WLZY-S10
Technical Specifications
| Front panel | 110 x 62 mm |
|---|
| Enclosure | 95 x 91.5 x 45 mm |
|---|
| Cut-out | 92.5 x 45.5 mm |
|---|
| Power supply | DC 24V |
|---|
| Operating temperature | -10 to 40°C |
|---|
| Relative humidity | <90% RH |
|---|
| Display divisions | 1000-100000 |
|---|
| Division steps | 1, 2, 5 × 10^k |
|---|
| Minimum discernible signal | 0.5μV |
|---|
| Temperature coefficient | 2ppm/°C |
|---|
| Non-linearity | 0.005% |
|---|
| Sampling rate | >300/s |
|---|
